StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL 5026 Auto-Clean

Mark Poeschl_2
Honored Contributor

MSL 5026 Auto-Clean

I've got an MSL5026 (firmware version 5.13) with the auto-clean feature enabled. Is there any way to tell how many times the cleaning tape has been used? Something other than walking up to the front panel would be preferred. ;-)
2 REPLIES
Art Wiens
Respected Contributor

Re: MSL 5026 Auto-Clean

If your library is connected to Ethernet, and has an IP address set, you can browse to it for management purposes. The default admin password is "2".

Select (click) on one of the drives and choose detailed status, it gives a count for how many cycles have occured on the cleaning "tape".

HTH,
Art
Mark Poeschl_2
Honored Contributor

Re: MSL 5026 Auto-Clean

Thanks - that's perfect.