HPE Community
StoreEver Tape Storage
1752671 Members
5464 Online
108789 Solutions
New Discussion

Re: MSL 6030- Cant access NSR

 
Khurram Shahzad
Regular Advisor

‎03-18-2007 07:08 PM

‎03-18-2007 07:08 PM

MSL 6030- Cant access NSR

Hi,
I have just installed an MSL Library, I want to configure NSR through cross Cable, i have given my notebook with IP 1.1.1.2 and subnet 255.255.255.0. But when i try to ping NSR IP 1.1.1.1 it doesn't respond.

Kindly help me in this regard.
0 Kudos
Reply
1 REPLY 1
Torsten.
Acclaimed Contributor

‎03-18-2007 11:38 PM

‎03-18-2007 11:38 PM

Re: MSL 6030- Cant access NSR

Hi,

I have seen a lot of NSR's configured to DHCP by default, the hostname is "Router".

Try to connect to this name if you have a DHCP server in your network or connect via the serial cable and set up the IP address manually.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.