1748109 Members
4835 Online
108758 Solutions
New Discussion юеВ

Re: MSL 6030

 
Binubaby
Frequent Advisor

MSL 6030

Hello Forum

Facing problem with MSL6030 Ultrium2 drive. It writes but while reading stops with error: Read error
FW on the drive: 007.646
any suggestions ???

bins
BB
3 REPLIES 3
Sameer_Nirmal
Honored Contributor

Re: MSL 6030

Binubaby
Frequent Advisor

Re: MSL 6030

Thank you Sameer the URL is useful
BB
Binubaby
Frequent Advisor

Re: MSL 6030

Hi Forum,

Related to the same MSL backup problem and while checking the eventlogs for NSR e1200 I am getting the following error messages,

1022. 04/16/2006 05:49:36 0d23h25m06.54s CHK COND with Sense Key=0x3, ASC=0x14, ASCQ=0x0 from SCSI LUN 1/2/0
1023. 04/16/2006 05:56:30 0d23h32m00.08s CHK COND with Sense Key=0x3, ASC=0x14, ASCQ=0x0 from SCSI LUN 1/2/0
1024. 04/16/2006 05:58:57 0d23h34m26.89s SCSI UDC Error. Port 0 Target 1, S_ID 0x750813, CDB[0] 0x08, Device Type 1
1025. 04/17/2006 02:33:57 1d20h09m27.70s SCSI Parity/CRC/AIP Error. Port 0 Target 0, S_ID 0x751513, CDB[0] 0x12, Device Type 1
1026. 04/17/2006 02:33:57 1d20h09m27.71s SCSI Parity/CRC/AIP Error. Port 0 Target 0, S_ID 0x751513, CDB[0] 0x12, Device Type 1
1027. 04/17/2006 02:33:57 1d20h09m27.71s SCSI Parity/CRC/AIP Error. Port 0 Target 0, S_ID 0x751513, CDB[0] 0x12, Device Type 1
1028. 04/17/2006 02:34:16 1d20h09m46.59s SCSI port 0 invalid DSA
1029. 04/17/2006 02:34:16 1d20h09m46.59s SCSI HTH Error. Port 0 Target 0, S_ID 0x751513, CDB[0] 0x12, Device Type 1
1030. 04/17/2006 02:34:16 1d20h09m46.59s SCSI port 0 bus reset
1031. 04/17/2006 03:11:41 1d20h47m11.70s CHK COND with Sense Key=0x4, ASC=0x8, ASCQ=0x0 from SCSI LUN 1/2/0
1032. 04/17/2006 03:11:41 1d20h47m11.87s CHK COND with Sense Key=0x4, ASC=0x8, ASCQ=0x0 from SCSI LUN 1/2/0
1033. 04/17/2006 03:11:42 1d20h47m12.05s CHK COND with Sense Key=0x4, ASC=0x8, ASCQ=0x0 from SCSI LUN 1/2/0
1034. 04/17/2006 03:11:42 1d20h47m12.63s CHK COND with Sense Key=0x4, ASC=0x8, ASCQ=0x0 from SCSI LUN 1/2/0
1035. 04/17/2006 03:11:42 1d20h47m12.63s SCSI UDC Error. Port 0 Target 0, S_ID 0x751513, CDB[0] 0x12, Device Type 1
1036. 04/17/2006 03:11:42 1d20h47m12.63s SCSI port 0 invalid DSA
1037. 04/17/2006 03:12:01 1d20h47m31.10s SCSI port 0 invalid DSA
1038. 04/17/2006 03:12:01 1d20h47m31.10s SCSI HTH Error. Port 0 Target 0, S_ID 0x751513, CDB[0] 0x12, Device Type 1
1039. 04/17/2006 03:12:01 1d20h47m31.10s SCSI port 0 bus reset
1040. 04/18/2006 01:14:33 2d18h50m03.99s CHK COND with Sense Key=0x3, ASC=0x14, ASCQ=0x0 from SCSI LUN 1/2/0

Please advice.
bins

BB