Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL 6060 Fault

R.Linnenbank
Occasional Visitor

MSL 6060 Fault

dear Experts,
We have a MSL 6060 Tape Libary with two Ultrium 960 drives. For last few days when i power cycle the library it gives "Fault code: 3032 (soft) Chasis S/N character count is not correct" error msg.
The library is scsi attached to a IBM P505 server.
Any help will be really appreciated as i am really fed up now with this.

Thanks in Advance.
1 REPLY
Rob Leadbeater
Honored Contributor

Re: MSL 6060 Fault

Hi,

From the userguide here:

http://bizsupport.austin.hp.com/bc/docs/support/SupportManual/c01381698/c01381698.pdf

A valid serial number bar code label
could not be read.

Corrective action is to Press the Enter button to clear the message, and Contact Support.

If this happens all the time, I would guess that either the barcode reader is faulty - do you have problems reading tape labels ? - or the label inside the unit has become damaged somehow...

Hope this helps,

Regards,

Rob