MSL2024 960FC Tape Library

[Louann Duchemin]

Has anyone see the message "recovery" display in the OPC screen after loading in a magazince? I have not been able to located any documentation to tell why it would display that message.

Library Firmware Version 3.30/2.40e
Tape Drive Firmware Version M63W

[Marino Meloni_1 · Accepted solution]

you can read here the meaning of "Recovery" on the OCP of the MSL2024

http://forums12.itrc.hp.com/service/forums/questionanswer.do?threadId=1238732


marino

[Louann Duchemin]

I found out the answer to my question. If the small plastic clips are missing on a cell of the magazine, the tape library has problems inventorying what tapes are in what cell. Once we replaced the missing clip, all was well again.

Can the clips be purchased separately?

[Marino Meloni_1]

Sorry for delay in answering, I think you already got the answer from HP directly, in case here is the answer:
no this small plastic part is not orderable, you need to order the magazine

marino