StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL2024 - telnet interface

KarstenPE
Frequent Advisor

MSL2024 - telnet interface

Hello,

is there a way to secure the telnet interface of the MSL2024 library? For instance setting a password, or completely disabling it.
Per default you do not need to logon to read out the library, and this behaviour is not wanted.

Thanks,
Karsten
2 REPLIES
marsh_1
Honored Contributor

Re: MSL2024 - telnet interface

hi,

the network is enabled always by default even if you reset the library to factory defaults, you could try taking out the ip address/disable dhcp or giving it an unreachable address/mask/gateway combo, or pull out the network cable !

hope this helps



Greybeard
Esteemed Contributor

Re: MSL2024 - telnet interface

Hi Karsten,
why not block the telnet ports on your network switch for the port that serves the library. this way you can still use the password enabled web gui.
_________________________________________________
How to assign points on this new forum? Click the Kudos Star!