StoreEver Tape Storage
1748069 Members
5439 Online
108758 Solutions
New Discussion юеВ

Re: MSL4048 tape library error

 
Curtis Ballard
Honored Contributor

Re: MSL4048 tape library error

It's available in the front panel under Support -> Run Tests

Select "Test" and down arrow to get to Wellness.

If you aren't at the library you can run "Demo" from the web interface but that won't always get the worst case slots. Wellness requires tapes in specific locations (the four corners) so it's only on the front panel where a user can import tapes if necessary.
Fabian Brise├▒o
Esteemed Contributor

Re: MSL4048 tape library error

Hello curtis.
Im already in the wellnes test screen
options.

1. number of cycles 1, is this ok ?

2. Drive1

Tnaks for the help

Knowledge is power.
Curtis Ballard
Honored Contributor

Re: MSL4048 tape library error

1 cycle is fine but I like to run 10 just to make certain there isn't some transient that won't happen on the first cycle.
Fabian Brise├▒o
Esteemed Contributor

Re: MSL4048 tape library error

Hello curtis.

How long does this test take (aprox)??

Knowledge is power.
Ganz
Trusted Contributor

Re: MSL4048 tape library error

Hi Fabian. The wellness test takes about 15 mins per cycle.