cancel
Showing results for 
Search instead for 
Did you mean: 

MSL4048

SOLVED
Go to solution
inex
Super Advisor

MSL4048

Hi,

After upgrading code on an MSL4048 to the latest version 7.00, the password on the web utility/administrator does not work. And the password on the ocp (8 times 0) does not work either. Any ideas...

-inex
4 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: MSL4048

I would try to set a password on the OCP.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
inex
Super Advisor

Re: MSL4048

But old password 8 times 0 does not work.

-inex
Torsten.
Acclaimed Contributor

Re: MSL4048

Can you set the password on OCP? If not, give HP a call, they can provide you a temp. password.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
inex
Super Advisor

Re: MSL4048

ok, thanks.

-inex