MSL5026 Tape Library

[Nuno Branco_1]

Hello,

I am using RedHat 8.0 with a custom 2.4.18 Kernel to access my MSL5026
library. Everything was working ok until today morning when i installed
the newest firmware for the MSL5026 Controller (i was having some
problems with Arkeia and the library itself).

Now it detects both tapes on LUN 1 and LUN 2 but it doesn't detect the
library wich used to be /dev/sgd. I also noticed (on windows) that the
libray went from LUN 3 to LUN 4, but there shouldn't be a problem.

I am using the lpfcdd module from emulex, the latest version (4.21g)
acording to their website. Someone could share a resolution to this
problem if you been there before?

Thanks.

Below is the output of cat /proc/scsi/scsi:

Attached devices:
Host: scsi0 Channel: 00 Id: 00 Lun: 00
Vendor: COMPAQ Model: DATA ROUTER Rev: 1187
Type: Unknown ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 00 Lun: 01
Vendor: COMPAQ Model: SuperDLT1 Rev: 4B4B
Type: Sequential-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 00 Lun: 02
Vendor: COMPAQ Model: SuperDLT1 Rev: 4B4B
Type: Sequential-Access ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 01 Lun: 00
Vendor: DEC Model: HSG80CCL Rev: V85F
Type: Unknown ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 02 Lun: 00
Vendor: DEC Model: HSG80CCL Rev: V85F
Type: Unknown ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 03 Lun: 00
Vendor: DEC Model: HSG80CCL Rev: V85F
Type: Unknown ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 04 Lun: 00
Vendor: DEC Model: HSG80CCL Rev: V85F
Type: Unknown ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 05 Lun: 00
Vendor: DEC Model: HSG80CCL Rev: V85F
Type: Unknown ANSI SCSI revision: 02
Host: scsi0 Channel: 00 Id: 06 Lun: 00
Vendor: DEC Model: HSG80CCL Rev: V85F
Type: Unknown ANSI SCSI revision: 02