StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL5026 and Storage Router e1200-160

Miguel Carranza
Frequent Advisor

MSL5026 and Storage Router e1200-160

I replaced the e1200-160 router in my msl5026 library. It is a refurbished router I got from ebay. I have only setup the router networking properties (ip, etc.). I am asuming there is no extra configuration to perform on the router nor the SAN switch. My SAN switch zoning "sees" the wwn from the new router, but my windows server attached to the san still dont see the library. Any ideas? Is there anything I need to setup on the router?
2 REPLIES
Torsten.
Acclaimed Contributor

Re: MSL5026 and Storage Router e1200-160

You need to adjust the mapping and configure "your" WWNs.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Miguel Carranza
Frequent Advisor

Re: MSL5026 and Storage Router e1200-160

THanks for your reply.
I know we have to perform the mapping, but our question is the "how to".
I was finaly able to make it work. Dont know exactly how. Kept playing with the mapping and port settings in the router and reboot it.
It´d be nice to know the proper method though.
Any ideas?