HPE Community
StoreEver Tape Storage
1752788 Members
6127 Online
108789 Solutions
New Discussion юеВ

MSL5026 and Storage Router e1200-160

 
Miguel Carranza
Frequent Advisor

тАО03-30-2010 09:30 AM

тАО03-30-2010 09:30 AM

MSL5026 and Storage Router e1200-160

I replaced the e1200-160 router in my msl5026 library. It is a refurbished router I got from ebay. I have only setup the router networking properties (ip, etc.). I am asuming there is no extra configuration to perform on the router nor the SAN switch. My SAN switch zoning "sees" the wwn from the new router, but my windows server attached to the san still dont see the library. Any ideas? Is there anything I need to setup on the router?
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО03-30-2010 09:56 AM

тАО03-30-2010 09:56 AM

Re: MSL5026 and Storage Router e1200-160

You need to adjust the mapping and configure "your" WWNs.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Miguel Carranza
Frequent Advisor

тАО03-30-2010 11:59 AM

тАО03-30-2010 11:59 AM

Re: MSL5026 and Storage Router e1200-160

THanks for your reply.
I know we have to perform the mapping, but our question is the "how to".
I was finaly able to make it work. Dont know exactly how. Kept playing with the mapping and port settings in the router and reboot it.
It├В┬┤d be nice to know the proper method though.
Any ideas?
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.