StoreEver Tape Storage
Showing results for 
Search instead for 
Did you mean: 

MSL5030 SCSI problem

Frequent Advisor

MSL5030 SCSI problem


I have a MSL5030 tape Library connected to a HP rp3410 server. Last day during a backup, a SCSII time out event occure. Sincen, the server is not able to recognize the tape Library and the Drive 0. Only Drive 1 is detected on the server. I tried "insf" hp-ux command to reinstall the Library, but It didn't work. I think it's SCSII card problem.

Could someone Help me?
Acclaimed Contributor

Re: MSL5030 SCSI problem

Several options:

- power cycle the library
- inspect cables, terminators
- use LTT to analyze
- open a support call

Hope this helps!

There are only 10 types of people in the world -
those who understand binary, and those who don't.

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Curtis Ballard
Honored Contributor

Re: MSL5030 SCSI problem

It sounds like you may be on the right track. You can re-wire the SCSI cables on the library to move the library and drive 0 to the HBA that is currently connected to drive 1 and verify that the library and drive 0 are functioning correctly.