HPE Community
StoreEver Tape Storage
1752334 Members
5986 Online
108786 Solutions
New Discussion юеВ

MSL5030 SCSI problem

 
GNOM
Frequent Advisor

тАО05-28-2007 08:11 PM

тАО05-28-2007 08:11 PM

MSL5030 SCSI problem

Hi,

I have a MSL5030 tape Library connected to a HP rp3410 server. Last day during a backup, a SCSII time out event occure. Sincen, the server is not able to recognize the tape Library and the Drive 0. Only Drive 1 is detected on the server. I tried "insf" hp-ux command to reinstall the Library, but It didn't work. I think it's SCSII card problem.

Could someone Help me?
0 Kudos
Reply
2 REPLIES 2
Torsten.
Acclaimed Contributor

тАО05-29-2007 01:44 AM

тАО05-29-2007 01:44 AM

Re: MSL5030 SCSI problem

Several options:

- power cycle the library
- inspect cables, terminators
- use LTT to analyze
- open a support call

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Curtis Ballard
Honored Contributor

тАО05-30-2007 09:52 AM

тАО05-30-2007 09:52 AM

Re: MSL5030 SCSI problem

It sounds like you may be on the right track. You can re-wire the SCSI cables on the library to move the library and drive 0 to the HBA that is currently connected to drive 1 and verify that the library and drive 0 are functioning correctly.
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.