Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL6000 Pass-Through. Can not see all drives on OS

Monikvm
Occasional Advisor

MSL6000 Pass-Through. Can not see all drives on OS

I extended the MSL6060 with another three MSL6060 and a pas-through mechanism.
We got a internal router card for FC connection

The master and slave libraries works fine,I move tape between all drives and slots, but when I try to see on SAN, I can not see the 16 drives, I just can see 5 drives on HP-UX server.
I checked the zone configuration and was ok.
The FC cables ok.
I configured maps on e1200-320 4Gb Fibre Channel Interface Card, I included the the tape drives, CHRG and NSe1200-320 on map Port 0 Device Map, but nothing happend.
I used LUN id consecutive on each of 8 routers map, I mean, at the first router I used the LUN id 0-4, to next router 5-8.....for tape drives, CHRG, and NSe1200-320.

I erased the indexed map, but did not work.
Some body know Do I have to set or move some parameters?
Just wondering if anyone has had any experience with this can help me.
Thanks in advanced