StoreEver Tape Storage

MSL6000 front panel msg: "Magazine type changed"

 
ZRELLLI
HPE Pro

Re: MSL6000 front panel msg: "Magazine type changed"

ANY  UPDATE PLEASE FOR THIS ISSUE :

 

MSL6000 front panel msg: "Magazine type changed"

 

"Some of the inserted magazines (lower right) are of a different type than the ones removed.

Leaving these magazines in the library will cause its geometry to change.

Press OK to reconfigure and reboot, press CANCEL to replace magazine."

Accept or Kudo

Torsten.
Acclaimed Contributor

Re: MSL6000 front panel msg: "Magazine type changed"

Likely the same reason as in the posts above - a sensor problem.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!