StoreEver Tape Storage
1748275 Members
3814 Online
108761 Solutions
New Discussion юеВ

MSL6000 with a NSR 1200 on Integirty Superdome 2 with HP-UX 11.31

 
Cron
Frequent Advisor

MSL6000 with a NSR 1200 on Integirty Superdome 2 with HP-UX 11.31

Hi Guys:

We have some problem with a MSL 6000 Tape Library with a NSR 1200, connected to an HP Integrity Superdome 2 with HP-UX 11.31.

We have configured the zoning in the SAN Switch, in fact we can see the PWWN of the Virtual Partition, we configured the mapping settings but we can't see the drivers and the changer in HP-UX 11.31.

We have checked and the drivers, stape, estape, eschgr and schgr, are static in the kernel.

Don't you know what the problem is? Are we doing something wrong?.

Thanks,

Javier
3 REPLIES 3
Cron
Frequent Advisor

Re: MSL6000 with a NSR 1200 on Integirty Superdome 2 with HP-UX 11.31

The storage router is an HP StorageWorks e1200-320 4G.

Thanks,

Javier
Torsten.
Acclaimed Contributor

Re: MSL6000 with a NSR 1200 on Integirty Superdome 2 with HP-UX 11.31

Likely a problem with the mapping ...

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Cron
Frequent Advisor

Re: MSL6000 with a NSR 1200 on Integirty Superdome 2 with HP-UX 11.31

We solved the problem resetting the NSR.

Thanks,

Javier