Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL6000

lloonngg
Occasional Contributor

MSL6000

Hi everybody.I have 1 question.
Can a MSL6000 work with two different drives.
1st ultrium2 hot plug
2nd ultrium2 non hot plug.
because i have a trouble. when i install the second drive(ultrium2 non hot plug) over OCP i can see both drives, but over LTT tool the second drive is not accessible.
can you help me with this issue
thank you in advance
2 REPLIES
Wei Jung
Trusted Contributor

Re: MSL6000

Could you explain how are you cabling it in the back of the library?
If you could attach a picture of it, it will be better.
tkc
Esteemed Contributor

Re: MSL6000

OCP got the drive status probably from the slot and not from the connection with the Network Storage Router (NSR). You might want to check the connection to the NSR and also reboot the library since the drive is not a hot-pluggable type.