MSL6030 & NT4

[Chris Bennett_13]

Hi everyone, can anyone tell me is the MSL6030 compatible with NT4 / Backupexec 8.6. I have an ML570 connected directly via the usual SCSI cables to the Library. NT4 has detected the Ultrium 460 drive within it and I have installed the drivers but backupexec only see's the drive and not the library. When I look at the properties of the Adaptec card the library is connected to NT4 states it's working but there's no driver installed. Do I need a driver for the library itself? Any comments suggestions would be most appreciated.

[Andrzej Kowalik]

Hi Chris,
You need drvers from Veritas (not HP) and you must disable Removable Storage service.
regards,
Andrzej