StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

MSL6060 MASTER DISCONNECT FROM SLAVE UNIT

Angel Casillas
Occasional Visitor

MSL6060 MASTER DISCONNECT FROM SLAVE UNIT

HI ALL,
MY CUSTOMER HAVE A MSL6060 WITH 2 DRIVES IN THE MASTER AND A SLAVE WITH 4 DRIVES, THE PROBLEM IS THAT THEY GET DISCONNECT INTERMITTENTLY AND BACKUPS WERE INTERRUPTED. BOARDS WERE REPLACED TWICE AND FIRMWARE IS UPDATED LAST WEEK. THANKS FOR YOUR PROMPT RESPONSE.
ANGEL CASILLAS
1 REPLY
Torsten.
Acclaimed Contributor

Re: MSL6060 MASTER DISCONNECT FROM SLAVE UNIT

If master and slave disconnects from each other, you will have a problem with the network connection.

Master and slave are connected via a private network connection and a special hub. Bad cable or hub?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!