StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Msl 4048 tape library

degaul nkunga
Occasional Contributor

Msl 4048 tape library

you're powering on for the first time, when could you plug in the host server and all attached devices to the library?
2 REPLIES
Torsten.
Acclaimed Contributor

Re: Msl 4048 tape library

Rule of thumb: First plug in the cables, then power on.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Nava Murali
Occasional Advisor

Re: Msl 4048 tape library

Following the thread,
plug in step : follow above advice.
Boot up : boot the library to ready state first before the host server.

-nava-