HPE Community
StoreEver Tape Storage
1753523 Members
9351 Online
108795 Solutions
New Discussion

Msl 5030 with FCA2214

 
CA1259748
New Member

‎03-16-2005 08:35 AM

‎03-16-2005 08:35 AM

Msl 5030 with FCA2214

Have attach the MSL5030 library to my server with the FCA2214 adapter. The link fiber is OK and the led in the adapter is ambra ON.
But the adapter and the system don't find the library and the tape. Why ?
My system is DL360 with windows 2003.
0 Kudos
Reply
1 REPLY 1
meloni
Honored Contributor

‎03-18-2005 09:21 AM

‎03-18-2005 09:21 AM

Re: Msl 5030 with FCA2214

in order to see the devices (robotic controller and drive) from a MSL with FC, you need to log on the NSR and create a map. when the map is created you have to assign the map to the server, this presentation should be made assigning the map you created to the WWN of the controller that should appear after a discovery on the FC port.
If the WWN of the server do not appear, check for cabling, zoning and speed on the switch

marino
---------------X-------------------X--------------------X----------------X--------------
If everything is under control, you are going too slow (Mario Andretti)
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.