StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

NSR E1200 U160 does not start

cbs400
Occasional Contributor

NSR E1200 U160 does not start

lnPci0: no carrier
NFS client support not included.
Contacting DHCP server for lnPci0...done.
SCSI bus 0 is up. Connect Mode: (LVD)
SCSI Controller is a 1010 Terminators On

SCSI bus 1 is up. Connect Mode: (LVD)
SCSI Controller is a 1010 Terminators On

Activating Interrupts for SCSI bus 0
Activating Interrupts for SCSI bus 1

Assertion failed: 0, file ../ps_util.c, line 133
Target Name: Generic
User: target
Attaching network interface lnPci0... done.
Attached TCP/IP interface to lnPci unit 0
Attaching network interface lo0... done.
interrupt:
lnPci0: no carrier
NFS client support not included.
Contacting DHCP server for lnPci0...done.
1 REPLY
Torsten.
Acclaimed Contributor

Re: NSR E1200 U160 does not start

If a power off/on does not help, try to reseat the card. The unit is likely bad, but consider to reflash the firmware (via serial, should always work).

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!