Problem facing to install HP SCSI DDS3 DAT ( model C1555D/q1574a) on HP Proliant ML350G4P

[santanu28]

I need to install a DDS3 HP DAT ( model no C1555D/q1574A) on HP Proliant ML3560G4P server.
The problem is whenever trying to connect the DAT to the any of the HBA interface ( on board SCSI ) the system is hanged at the tyme of SCSI search. Tried with the 1) TERM/PWR jumper of DAT on/off 2) External terminator suuplied with the DAT with/without
There are four no of server and facing problem with all the server.
Any input will be great help.
ML350G4P server cabling matrix doc attach for reference

[Marino Meloni_1]

It looks like you have a problem with the cable or with the drive, check for bent pins or broken pins on the dat itself

marino

[Marino Meloni_1]

also I remember that there is a converter from the cable 68 pins to the drive connector with 50 pins, try to remove and check it also

[santanu28]

Thanks for your response.
It is found that the DAT drive is not compatible with the HBA of ml350g4p.
thread closed

[santanu28]

closed