StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Procedure to install mls6000

Carl Legault
Occasional Visitor

Procedure to install mls6000

Hi
We bought a hp mls6000 with 4 drive module and two fibre channel port adapter. I'm not able to find a plan explaining to me how to connect thoses unit storage with my two fibre channel adapter and the SCSI located in the back of the msl6000.

Thanks in advance
3 REPLIES
Mark Poeschl_2
Honored Contributor

Re: Procedure to install mls6000

tkc
Esteemed Contributor

Re: Procedure to install mls6000

if you are planning to direct attaching the library to the host, i.e. no sharing with other hosts, you will just need to connect the fibre port from each storage router (NSR) to each fibre channel adapter in the host. then from the same NSR, connect each NSR to 2 drives, daisy chained. only one of the NSR will be daisy chained with the robotic controller as well. you can download the document to setup the NSR with MSL6000 library in the following link :

http://h20000.www2.hp.com/bizsupport/TechSupport/SupportTaskIndex.jsp?lang=en&cc=us&prodTypeId=12169&prodSeriesId=316040&taskId=115
Torsten.
Acclaimed Contributor

Re: Procedure to install mls6000

Refer to
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?lang=en&cc=us&objectID=c00659626

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!