StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Proliant 3000 Firmware Failure

Ben Slowley
Occasional Contributor

Proliant 3000 Firmware Failure

Upgraded the System with Rompaq sp20622 11/08/2000, and completed but Windows kept booting with a blue screen error. Upgraded the smart3200 array with rompaq 4.50, but still same error. Check memory modules everything looked fine. Nothing prior too the system firmware upgrade was done to windows NT 4. Attempted to use the rompaq module in the utilities partition to downgrade to 1998 variant by the system reported errors and required a reset. Once reset the system will not boot in any way black screen.