Showing results for 
Search instead for 
Did you mean: 

Proliant DL360

Augustus Payne
Occasional Contributor

Proliant DL360

Server has two disks. They work fine when configured individually doesn't matter which slot. But they crash when they are inserted in the bays at the same time no matter what the configuration is - RAID 0 or 1+0. I have replaced the backplane but that did not help. Any Idea??
Uwe Zessin
Honored Contributor

Re: Proliant DL360

Don't do that! If you attempt drive roaming - the server must be DOWN. The controller will only read the configuration data when it is booting.