Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
StoreEver Tape Storage
Showing results for 
Search instead for 
Did you mean: 

Proper way to turn off 1/8 G2 auto loader

Occasional Advisor

Proper way to turn off 1/8 G2 auto loader

Dear Experts,

I am looking for proper method to shut down the autoloader 1/8 G2, There is a power button on auto loader,  presessing same will turn it off?

OR we need to use 'next', 'previous' keys to turn the device completely off?

In the user guide I found the below but seems to me they are only for Drive not for complete hardware:

Use this option to power a drive on or off without interrupting power to the rest of the device.
Access to this feature requires the administr ator password.
T o power on or off the drive:
1 . From the Home screen, press Previous or Next until the screen displays Support. Press Enter
to select .
2. Press Previous or Next until the screen displays Power On/Off Drive. Press Enter to select .
3. Enter the administr ator password, if prompted.
4. The screen displays Drive. The second line in the display displays the current state, which is
either P ower ON or P ower OFF.
5. T o change the power status, press Enter. The screen displays either Press Enter to Power off
Drive, or Press Enter to P ower on Drive. Press Enter to select . The Ready LED blinks during the


Please assist because I don't want to do wrong way resulting in any problem.



Acclaimed Contributor

Re: Proper way to turn off 1/8 G2 auto loader

Pressing the power button will shutdown the autoloader,

Hope this helps!

There are only 10 types of people in the world -
those who understand binary, and those who don't.

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!