StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

SBCON does not see the tape drive

Ayman Altounji
Valued Contributor

SBCON does not see the tape drive

Just purchased an ML350 server that came with a 12/24 DAT tape drive already installed. I installed NWSB 5.1 (loaded ASPI support during installation). During boot, SCSI controller sees it at slot 1, port 2 and the adapter is activated. However, enhanced sbackup (sbcon) from Novell does not see the drive. In List Devices, I get un unbound object (which I am not sure if it is the drive).

Can anybody help ?
1 REPLY
Ayman Altounji
Valued Contributor

Re: SBCON does not see the tape drive

Make certain you're loading the latest device drivers

CPQSCSI.HAM

NWASPI.CDM