StoreEver Tape Storage
1748076 Members
5319 Online
108758 Solutions
New Discussion

SCSI Errors on Tape Library

 
Scott Boucher
New Member

SCSI Errors on Tape Library

Greetings,

Using an HP MSL5000 Library with Commvault back up software we seem to be getting the same errors, However I cannnot find the source of them asn was wondering if anyone could assist, I have included them below
These are the errors they were seeing from

ILLEGALREQUEST 0x05
24 00 INVALID FIELD IN CDB

UNITATTENTION
0x06
28 00 NOT READY TO READY CHANGE, MEDIUM MAY HAVE CHANGED. Doors opened or closed.



RECOVEREDERROR 0x01
5D 00 FAILURE PREDICTION THRESHOLD EXCEEDED



NOSENSE 0x00
00 02 END-OF-PARTITION/MEDIUM DETECTED


BLANKCHECK 0x08

00 05 END-OF-DATA DETECTED

NOTREADY 0x02

04 83 Aisle power is disable; a door could be open.


x6 x28 x8D



ILLEGALREQUEST 0x05

3B 0E MEDIUM SOURCE ELEMENT EMPTY



MEDIUMERROR 0x03

0C 00 WRITE ERROR



MEDIUMERROR 0x03

11 00 UNRECOVERED READ ERROR



NOTREADY 0x02

30 03 CLEANING CARTRIDGE INSTALLED
1 REPLY 1
Mike Cross
Advisor

Re: SCSI Errors on Tape Library

Most of these define what is going on. So I'm not sure what you mean when you say what is causing them.

05 24 00 - Invalid req. Means that a command was issued that was invalid.
Example would be issue a move media command from a slot OR DRIVE THAT DOESN'T HAVE MEDIA IN IT????

The NO SENSE and Blank check indicate that the tape is full. And needs to unload/load a second tape. (Tape Spanning) on a backup.

The media erros, Write,read, or unrecovered read could be an indication that the drive needs to be cleaned. Or that the media has an issue.

Not Ready Cleaning cartridge installed. Says that a cleaning operation is taken place.

So for the most part these are informational messages being logged by comvault.

Not sure I answered your question. But hopefully it gives you a little bit of insight.