HPE Community
StoreEver Tape Storage
1752785 Members
6190 Online
108789 Solutions
New Discussion

SCSI I/O test program

 
SOLVED
Go to solution
Jasmin Berube
Advisor

‎02-02-2001 12:27 PM

‎02-02-2001 12:27 PM

SCSI I/O test program

Where I can get the file scsi_io.c for testing i/o after doing the procedure for autochanger DLT installation? I don't have in in /usr/contrib/bin.
0 Kudos
Reply
1 REPLY 1
Frederic Soriano
Honored Contributor

‎02-03-2001 05:41 AM

‎02-03-2001 05:41 AM

Solution

Re: SCSI I/O test program

Hi Jasmin,

This file is delivered with the SCSI passthru fileset, and you should find the scsi_io.c source file under /usr/contrib/src, and not /usr/contrib/bin.

Have a look at the output of the following command:

swlist -l file SCSI-Passthru | grep 'scsi_io\.c'

You should find the source file.

I hope this helps.

Best regards.

Fred.
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.