STK 9840 configuration problem

[Larry Schauer]

We have a K370 running HP-UX 10.20 and have recently connected an STK 9840 to it (SCSI interface). The following is the output from 'ioscan -f':

unknown -1 10/4/4/3.0 UNCLAIMED UNKNOWN STK 9840

What driver do I need to configure? I looked at SAM, and the stape driver is installed (tape1 and tape2 are not configured, though).

What do I need to do in order to configure the STK?

Thanks,
Larry Schauer

[Michael Tully]

Hi Larry,

Have a look at the attached document, it
should provide the correct information.

HTH
-Michael

http://www.docs.hp.com/cgi-bin/fsearch/framedisplay?top=/hpux/onlinedocs/B2355-90698/B2355-90698_top.html&con=/hpux/onlinedocs/B2355-90698/00/00/49-con.html&toc=/hpux/onlinedocs/B2355-90698/00/00/49-toc.html&searchterms=STK%7c9840&queryid=20011008-170000