StoreEver Tape Storage
1748003 Members
4654 Online
108757 Solutions
New Discussion юеВ

Stacked MSL6060 with NSR cabling

 
SOLVED
Go to solution
Rob Leadbeater
Honored Contributor

Stacked MSL6060 with NSR cabling

Hi,

Can anyone point me to a document that details the correct cabling configuration for 2 stacked, fibre channel, MSL6060s (8 drives, 4 NSRs) ?

I've found plenty of documents that show the correct cabling for a single MSL6060 with NSR, or stacked libraries without NSRs, but none that show everything together...

Thanks in advance,

Rob
3 REPLIES 3
Torsten.
Acclaimed Contributor

Re: Stacked MSL6060 with NSR cabling

"stacked" or not, the nsr cabeling is not that different, but only the primary library controller is connected to the nsr. The secondary lib controller should only have 1 terminator installed.


Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Rob Leadbeater
Honored Contributor

Re: Stacked MSL6060 with NSR cabling

OK. I think I'm there...

Just to double check, the only things connected to the slave library controller card are the ethernet connection to the "hub/router" and a terminator in the upper SCSI connector...?

Cheers,

Rob
Torsten.
Acclaimed Contributor
Solution

Re: Stacked MSL6060 with NSR cabling

Correct!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!