StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Storageworks DAT72x10 does not load the tapes on demand

Mariusz Brzezik
Occasional Contributor

Storageworks DAT72x10 does not load the tapes on demand

I have just installed Storageworks DAT72x10, but can not force it to load the tape from any slot to the drive. When i try to load it using l&tt front panel i get following error message:
"Could not perform move medium : Dataset not valid: SCSI:RE:02".
Also more error messages are displayed while performing Library excersiser Test:
"Skipping storage 1 (address 03E9, barcode [none]). Unable to find a compatible empty import/export or storage element in the test range."
The same error message for all the slots (1-10).
However, the Move Test (from any manualy selected slot to the drive) passes successfully.
Many thanks for help in this case.
1 REPLY
Mariusz Brzezik
Occasional Contributor

Re: Storageworks DAT72x10 does not load the tapes on demand

During my battles with this issue, i noticed, it might be related to incompability with Adaptec 2120S SCSI Controller. If i will be able to switch it with any of compatible HP SCSI controllers, i will put some news here.