Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
cancel
Showing results for 
Search instead for 
Did you mean: 

SureStore 2/20

Daniel Oh
Occasional Contributor

SureStore 2/20

Hi,

I set up the machine exactly like manual instructed, but in the backup s/w, which is OmniBack, only one drive is detected. I burned the latest firmware but nothing changes.

Any advice would be appreciated.

Thanks in advance.
1 REPLY
Michael Tully
Honored Contributor

Re: SureStore 2/20



There are number of things you can do.
Does the system display all of the
hardware and robotics in the 'ioscan'
display. That would be your starting
point if you are using HPUX.

Have a look at thlink as well.

http://www.hp.com/cposupport/manindex/hpsurestor18469_eng_man.html
Anyone for a Mutiny ?