1748123 Members
3307 Online
108758 Solutions
New Discussion

SureStore 2/20

 
Daniel Oh
Occasional Contributor

SureStore 2/20

Hi,

I set up the machine exactly like manual instructed, but in the backup s/w, which is OmniBack, only one drive is detected. I burned the latest firmware but nothing changes.

Any advice would be appreciated.

Thanks in advance.
1 REPLY 1
Michael Tully
Honored Contributor

Re: SureStore 2/20



There are number of things you can do.
Does the system display all of the
hardware and robotics in the 'ioscan'
display. That would be your starting
point if you are using HPUX.

Have a look at thlink as well.

http://www.hp.com/cposupport/manindex/hpsurestor18469_eng_man.html
Anyone for a Mutiny ?