HPE Community
StoreEver Tape Storage
1751945 Members
4890 Online
108783 Solutions
New Discussion

Surestore DAT 40i

 
Leonid_10
New Member

‎12-22-2003 05:44 PM

‎12-22-2003 05:44 PM

Surestore DAT 40i

I download LTT and run it on my Netware 5.0 server, but LTT not find my Surestore DDS 40i. Why?
0 Kudos
Reply
1 REPLY 1
Tina Karasch
Valued Contributor

‎01-02-2004 12:41 AM

‎01-02-2004 12:41 AM

Re: Surestore DAT 40i

Dear Leonid,

This could be :

a. that the backup sw you use with the dat40i is still running and because of that the diag sw LTT can't access the drv.

b. there has been a scsi reset on your scsi bus and because of that the drive can'tbe accessed. - reboot and it should be ok

c. you have not selected the dev in the diag sw.

d. the drive might need to be upgraded to the correct firmware to function correctly.

e. the scsi driver or tape driver might need to be upgraded

f. the drv is not ok

tk @>'-;---

If U want to; let's get technical.... :P
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.