TL892 2072 Comm Error

[Tony Gray]

A TL892 Mini Library connected to a Porliant 3000 using Fiber Channel is return a 2072 Comm Error. This device has been powered down numerous times. How should this error be cleared?

[CA1325640]

At power up, the MiniLibrary System recognizes if a previously configured drive unit has been
removed or disconnected. It then halts the powerâ up sequence, the drive fault LED lights, and
the screen displays a message similar to the following:
Fault Code: 2072
Drive Powerup Error
Power Down. Wait 30
Date Time
If the drive was intentionally removed, pressing the Escape button lets you reconfigure the
module to recognize the new condition and power up as normal. Follow this procedure:
1. Turn off the module power.
2. Press and hold the Escape button while turning on the unit power. All four control panel
LEDs light.
3. When the four LEDs go out release the Escape button

Cheers,
Awadhesh