Tape DLT poor

[Tommy Brown]

the format of the data is encoded. Omniback has a special format that it uses to write the tape. It writes in 150MB (default) sections, but the data is encoded or encrypted via an omniback algorithm. I really am not sure that DD can move the data from tape to disk back to tape and still be readable by omniback..
Tommy

[Arturo Mtz]

HI

I probed TapeAnalizer .
"timex /opt/omni/sbin/utilns/TapeAnalyser -device /dev/rmt/1m -list"
The result was both core file and error message :
"Number of active DA is bigger than allowed
Command terminated abnormally.

Thanks

[Arturo Mtz]

HI Now i'm reading the tape with TapeAnalizer, the command was:
"timex /opt/omni/sbin/utilns/TapeAnalyser -device /dev/rmt/1m -comp_encr -recdmp -catalog -rechdr -blkhdr"

When this command terminate, i'll try to recover data.......

Thanks

[Arturo Mtz]

HI

I can recover data from TAPE with the command

"timex /opt/omni/sbin/utilns/TapeAnalyser -device /dev/rmt/1m -filename /comercia
l/desarrollo/scepe003/respaldo/scepp003a.4gl -newfilename /temporal/arturo/recup
era.prueba2"

Thanks a lot for your help

I can restore my files from my DLT's with your tips

Regards to all !!!