Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
StoreEver Tape Storage
Showing results for 
Search instead for 
Did you mean: 

Tape library 2/20

Tape library 2/20

Hi guy

I have a Library 2/20 plugged in a K370.
The first scsi (HSC) is configured and claimed in ioscan. But the second one (HP-PB) is
unclaimed in ioscan. I?ve inputed in kernel
the drivers: sctl and spt. The driver schgr (in Sam) is for S700. The controler of library (c7200-8000) is unclaimed too.
Is there any patch that correct it?


Michael Tully
Honored Contributor

Re: Tape library 2/20

Hi Marcia,

Have a look at the attached document it should be of some assistance. Once thing to note is that the 'autoch' class will probably be the right one.

Anyone for a Mutiny ?
Acclaimed Contributor

Re: Tape library 2/20


as far as I know DLT 8000 drives are not supported on HP-PB SCSI Interfaces. You can connect these drives only to HSC cards in your K-Class (1 per controller).


Hope this helps!

There are only 10 types of people in the world -
those who understand binary, and those who don't.

No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!