Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Terminator for MSL2024

SOLVED
Go to solution
mst
Advisor

Terminator for MSL2024

Hello,

i have a MSL2024 an this SCSI Terminator:

C2364A

Does this terminator fit to the MSL2024 ?
3 REPLIES
Rob Leadbeater
Honored Contributor
Solution

Re: Terminator for MSL2024

Hi,

A quick search on PartSurfer http://partsurfer.hp.com shows that the part number for the terminator on an MSL2024 is 353889-001, which is a "Low Voltage Differential (LVD) SCSI terminator - Has 68-pin high density (M) connector with thumbscrews".


A C2364A would appear to be an "Active Wide Single-Ended SCSI terminator - With 68-pin high density (M) connector with thumbscrews"

So yes it will fit. I don't think there's any problems using an SE terminator in place of an LVD terminator.

Cheers,

Rob
Curtis Ballard
Honored Contributor

Re: Terminator for MSL2024

The C2364A terminator is the currently shipping U320 LVD terminator and that terminator is compatible with that library. Note that while this terminator is also compatible with SE or single ended, most single ended terminators are not compatible with U320. You need a U320 terminator with this library but most aren't specifically specified as supporting U320 so it's tricky to tell.
mst
Advisor

Re: Terminator for MSL2024

Thank you both for your helpful answers!