StoreEver Tape Storage
1748266 Members
3557 Online
108760 Solutions
New Discussion юеВ

Re: Twe SureStore DLT 40

 
Robert Ross_2
New Member

Twe SureStore DLT 40

How do I configure to have two units from one SCSI card.Any help would be great .
3 REPLIES 3
Leif Halvarsson_2
Honored Contributor

Re: Twe SureStore DLT 40

Hi
Your question is perhaps too summary. In general there is no problen using two DLT drives on the same SCSI bus, just assign different SCSI-adresses (the switch at the rear) to each drive.
Michael Tully
Honored Contributor

Re: Twe SureStore DLT 40

Hi,

This is one thing I would not do, is to have two DLT drives on the one SCSI card. You will most likely find that you will not get enough data to stream to the drive fast enough to have the two drives performing well. I suggest you invest in an additional card.

You can change the SCSI ID number at the rear of the unit.

Michael
Anyone for a Mutiny ?
Alexander M. Ermes
Honored Contributor

Re: Twe SureStore DLT 40

Hi there.
Some short answer : DON'T !
The bandwidth of the SCSI interface is just enough for one DLT drive. If you daisychain these things, you will have a major loss of possible performance.
Rgds
Alexander M. Ermes
.. and all these memories are going to vanish like tears in the rain! final words from Rutger Hauer in "Blade Runner"