StoreEver Tape Storage
1748214 Members
3368 Online
108759 Solutions
New Discussion юеВ

Ultrium 460 Errors/L&TT in restricted mode

 
MarkEllis
New Member

Ultrium 460 Errors/L&TT in restricted mode

Having some fun with an Ultrium 460.
On the front the Drive Error and Tape Error LEDs are constantly flashing.
But when I try and load up L&TT to try and see whats going on with it, I get an error saying L&TT is running in restricted mode.
This only gives me 2 options, Firmware update, and Support Info.

i have downloaded the latest firmware, but when I try and update it, it immediatly fails with the following error:
|__ Firmware update started on device 1/0.2.0 (F5CD:0x80000100/0x9 -> F63D:80000100/9)
||__ starting update...
||__ SCSI TUR failure with Sense Condition
||__ Sense Information: Sensekey: 0x4, ASC/ASCQ: 0x44/0x0 (Internal target failure)

Im trying to upgrade from F5CD to F63D.

Because L&TT is in restriced mode theres no other options of things to do.

Any thoughts on how to get the drive working again would be highly apreciated.

Attached is the support ticket.
2 REPLIES 2
Lewis Finch
Honored Contributor

Re: Ultrium 460 Errors/L&TT in restricted mode

if you are running windows, amke sure your backup software services are disabled and that Removable STorage service is also disabled
"You can't lead the orchestra without turning your back to the crowd"
MarkEllis
New Member

Re: Ultrium 460 Errors/L&TT in restricted mode

Running ArcServe, so I disabled all the Backup Engines, and stopped all the CA services, also stopped the Removable Storage service.
No luck. Still only running in restricted mode. And firmware updates still fail with the same error.