StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Ultrium Library Error

SOLVED
Go to solution
Anand V
Frequent Advisor

Ultrium Library Error

Dear Admins,

Pls guide me regarding the ultrium library.

If the console of library with html page

are opening and it shows the following error


Drive(s) not available on Fibre Channel
Drive Firmware Revision Levels are Inconsistent


Pls admins , what i need to exactly do to go for my backup routines


Thanks & Regards,

Anand



5 REPLIES
Torsten.
Acclaimed Contributor
Solution

Re: Ultrium Library Error

It is essential to mention the system type - there are so many.

"Drive Firmware Revision Levels are Inconsistent "

Consider an firmware upgrade using LTT - http://www.hp.com/support/tapetools

"Drive(s) not available on Fibre Channel "

Is the box using a NSR? Check cabling and mapping!

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Anand V
Frequent Advisor

Re: Ultrium Library Error

Dear Admins

I had downloaded the Ltt tool and installed to the server , where , my ultrium lib is
connected.

Thanks to Mr Torsten.

Now how to get the latest firmware for the attached drives.

Pls guide , in this , bcoz , i have less idea in backup mechanisms.

Thanks in Advance
Luk Vandenbussche
Honored Contributor

Re: Ultrium Library Error

Anand V
Frequent Advisor

Re: Ultrium Library Error

Dear Luk And Admins

I have Hp Surestore E 6/60 ultrium library

Is that patch will support for this library.

Pls reply.

Thanks In Advance.
Curtis Ballard
Honored Contributor

Re: Ultrium Library Error

When you run L&TT it should offer to download the latest firmware for all of the devices it finds as long as the system where you are running it has internet access.

The "Drives not available on Fibre Channel" message means that at least one of the drives did not connect to the interface controller which is similar to the old NSR's but isn't an NSR in that library. When that happens you may not be able to access the drive with L&TT unless you connect directly to the SCSI port on the drive.

The web interface can download the firmware to the drives once you get the latest firmware.