Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
StoreEver Tape Storage
Showing results for 
Search instead for 
Did you mean: 

Unable to access magazine on MSL5000

S Shariff_1
Occasional Contributor

Unable to access magazine on MSL5000

The following has just started ocurring on our MSL5026:

Whenever we need to access the left or right magazine and need to open either of the doors, we get the following error message:

"Host, via a SCSI Prevent/Allow command, is preventing magazine access"

We can still access the tapes via the mailslot.

We are using Legato Networker Version 7.0 (I've done a search on the HP knowledge base and the only hit is one related to backup exec)

Any help would be appreciated!
Marino Meloni_1
Honored Contributor

Re: Unable to access magazine on MSL5000

this is a security feature of the libraries, Software send a reserve command to the unit and lock the doors, it have the full controll of the tapes, and nobody can change them without letting it know.
that is why you have the possibility to load/unload tapes throught the mail slot, which is built for that purpose.
If you force the door to open, an inventory will then take place, that have to be passed also to the software. This can disrupt backups, and can take long time if you have no bar code reader.
Regular Advisor

Re: Unable to access magazine on MSL5000


I have had this problem many times with Data Protector, if you disable the Windows Removable storage service it goes away, but I am not sure if you can do this with Legato, I suggest you try it and see, if you can that is.