Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Unable to detect Tape Library

Sultan Khan
Occasional Visitor

Unable to detect Tape Library

Hi,

I have installed an HP StorageWorks MSL6000 Tape Library on fabric. I am unable to detect it from my server which is an HP BL460c running Windows Server 2003 standard, also connected to the fabric. I plan to run HP Data protector 6 for backups. Any ideas?
3 REPLIES
Torsten.
Acclaimed Contributor

Re: Unable to detect Tape Library

Did you configure the mapping in the NSR?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
Rob Leadbeater
Honored Contributor

Re: Unable to detect Tape Library

Hi,

Are you using zoning ? If so do you have a zone with your MSL and the blade server in it ??

Cheers,

Rob
blackhawk_1
Advisor

Re: Unable to detect Tape Library


Is there a switch involved in between. Or is the library directly connected to the Blade servers.