Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Upgrade drive in Storageworks 1/8 G2

SOLVED
Go to solution
Phil Schroeder
Occasional Visitor

Upgrade drive in Storageworks 1/8 G2

I have a Storageworks 1/8 G2 with an Ultrium 448 drive that died. I would like to replace the drive with a 920 (LTO 3). Is this possible?
3 REPLIES
Patrick Terlisten
Honored Contributor

Re: Upgrade drive in Storageworks 1/8 G2

Hello Phil,

that is possible, but you need a suitable drive for the autoloader. I think the only way will be to buy a spare part. Ask you local HP partner for the right drive and part number.

Best regards,
Patrick
Best regards,
Patrick
Víctor Cespón
Honored Contributor
Solution

Re: Upgrade drive in Storageworks 1/8 G2

Which will be:

435247-001 Ultrium 920 internal tape drive assembly

If you look up the model in PartSurfer
Phil Schroeder
Occasional Visitor

Re: Upgrade drive in Storageworks 1/8 G2

Just the info I needed. Thanks!