StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Upgrade firmware error with HP_LTT

WW198786
Occasional Contributor

Upgrade firmware error with HP_LTT

When I try upgrade firmware LTO G2 Ultrium 920, I obtain a message after 8 images transferred :
SCSI Write Buffers failure.
I have the latest version of the upgrade package.
I have tried with an older version and I obtain the same message but later.
3 REPLIES
TapeDrive Killer
Trusted Contributor

Re: Upgrade firmware error with HP_LTT

You need to stop all backup software services in order to upgrade firmware but you can also upgrade firware using RMI (Remote Manager Interface) it is faster this way just go to the OCP (operator control Panel) Configuration >>> Configure Network Settings

Pablo Alvarado Siles
One drink away from sleeping on the pavement
LTT Team
Valued Contributor

Re: Upgrade firmware error with HP_LTT

Hi,

There could be many reasons why you are receiving this error. Could you attach the EventLog.ltt & ResultLog.ltt? I would be able to root cause the issue.

Ideally, this issue occurs when there is a data corruption along the data path. It could be either due to the cable, driver, etc.

Regards,
Satya
L&TT Team
Pontier
Occasional Advisor

Re: Upgrade firmware error with HP_LTT

Bonjour,

Je suis mainteneur spécialiste stockage sur bandes et souhaiterais rentrer en contact avec vous afin de vous proposer nos services.

Cordialement.