Email Subscription Notifications Suspended Temporarily
We are in the process of making navigation in the Servers and Operating Systems forums simpler and more direct. While doing this, we have to temporarily suspend email notifications for subscriptions. If you are subscribed to one or more discussion boards or blogs in the community, please check them daily to see new content. Notifications will be turned back on in a few days. We apologize for any inconvenience this may cause. Thanks, Warren_Admin
StoreEver Tape Storage
cancel
Showing results for 
Search instead for 
Did you mean: 

Windows 2000 dirver for Bridge FC 2/1 lv ??

Bin Zhang
Occasional Visitor

Windows 2000 dirver for Bridge FC 2/1 lv ??

I use a Bridge FC 2/1 lv to connect a 2/20 tape Library to a windows 2000 host via SAN.

Every time when the windows 2000 startup, it prompt me for a driver for the FC 2/1 Bridge.

Do the bridge really need a driver? Where can I get it?

Thanks for your help.
Bin Zhang
3 REPLIES
Sanjay_6
Honored Contributor

Re: Windows 2000 dirver for Bridge FC 2/1 lv ??

Hi Bin,

Have you tried this link.

http://www.hp.com/cgi-bin/cposupport/swindex.pl?p=hpsurestor28037&l=en&c=Diagnostic

Hope this helps.

thanks
Sanjay_6
Honored Contributor

Re: Windows 2000 dirver for Bridge FC 2/1 lv ??

Hi bin,

Also take a look at this link.

http://www.hp.com/cposupport/swindexes/hpsurestor18469_swen.html

Hope this should help you to solve your problem.

thanks
Eric de Lange_2
Respected Contributor

Re: Windows 2000 dirver for Bridge FC 2/1 lv ??

Hello Bin,

There is no driver. the best thing to do is to change the entry in 'device manager' to 'disabled'. After that windows 2000 will not ask you anymore.

The FC to SCSI bridge is completely self-sufficient and does not require a driver.

best regards,

-Cal.