cancel
Showing results for 
Search instead for 
Did you mean: 

Wrong driver

dctw
Frequent Advisor

Wrong driver

Hi,

Would really appreciate your help here.

I'm using MSL6000 Series Tape Library and the driver picked up in the system was incorrect.

It should be schgr but went to pick up sctl instead.

I've tried to remove the system file and ioscan it and it still pick up sctl.

FYI, this library is shared with a few servers but there's no issue for other servers.

Is there anything that I can do?

FYI.

Wrong driver :
---------------------------------------
% ioscan -fnC autoch
Class I H/W Path Driver S/W State H/W Type Description
==========================================================================
autoch 1 1/0/4/1/0/4/0.1.15.255.0.0.0 sctl UNCLAIMED UNKNOWN HP MSL6000 Series
---------------------------------------

It should be :
---------------------------------------
% ioscan -fnC autoch
Class I H/W Path Driver S/W State H/W Type Description
===========================================================================
autoch 1 0/0/10/1/0/4/0.1.15.255.0.0.0 schgr CLAIMED DEVICE HP MSL6000 Series
/dev/rac/c13t0d0
---------------------------------------
1 REPLY
Torsten.
Acclaimed Contributor

Re: Wrong driver

Duplicated thread ...

Did you check if "schgr" is already in the kernel?

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.

__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!