HPE Community
StoreEver Tape Storage
1752790 Members
6441 Online
108789 Solutions
New Discussion юеВ

adding a new e1200-160 dataroute and tape drive

 
WilliamSmith11
Super Advisor

тАО11-15-2009 05:43 PM

тАО11-15-2009 05:43 PM

adding a new e1200-160 dataroute and tape drive

Hi
I have a MSL6000 series with two ultrium 3 tape drive, is attach to a SAN throught a e1200-160.

I want add a ultrium 4 tape drive but I want that be controlled by a second e1200-160 that I have bought.

Have I to map the new tape drive and the charger to the new e1200-160?

Have I to may some change to the actual configuration with the two ultrium 3 and the e1200-160 configuration?

Regards

W.S
rperez
0 Kudos
Reply
3 REPLIES 3
Torsten.
Acclaimed Contributor

тАО11-16-2009 01:58 AM

тАО11-16-2009 01:58 AM

Re: adding a new e1200-160 dataroute and tape drive

Leave the first NSR untouched, install the second, connect SCSI cable to drive, FC cable to switch and create a mapping - that's it.

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
Miguel Carranza
Frequent Advisor

тАО03-30-2010 10:17 AM

тАО03-30-2010 10:17 AM

Re: adding a new e1200-160 dataroute and tape drive

Hi. i have a similiar issue. just replaced my nsr. How do I create the port maping suitable for my setting?
I have 2 windows servers attached to the EVA SAN + the library. It used to be working with the previous router, i cannot get the servers to see the library now.
0 Kudos
Reply
Torsten.
Acclaimed Contributor

тАО03-30-2010 11:01 AM

тАО03-30-2010 11:01 AM

Re: adding a new e1200-160 dataroute and tape drive

Better to open your own thread!


Did you save the config of your old NSR???

Hope this helps!
Regards
Torsten.

__________________________________________________
There are only 10 types of people in the world -
those who understand binary, and those who don't.
__________________________________________________
No support by private messages. Please ask the forum!

If you feel this was helpful please click the KUDOS! thumb below!   
0 Kudos
Reply
The opinions expressed above are the personal opinions of the authors, not of Hewlett Packard Enterprise. By using this site, you accept the Terms of Use and Rules of Participation.